View at a different angle........

Stock No:                          1862

Specifications:

Manufacturer:                            John Bertram & Sons (Canada)
Swing Diameter over Bed:        28"
Distance between Centers:       96"
Swing Diam. over Cross Slide:  16" (with workpiece between centers)
Spindle Bore Size:                      2-1/8"
No. of Spindle Speeds:               12  Selectable Speeds
Range of Spindle Speeds :         8.5 - 335 RPM
Pitch of threads, (in.):                1/2 tpi to 28 tpi
Power Feeds:                             1/64  -  1
Spindle Nose Type:                    Taper nose
Main Spindle Power:                  10 HP @ 1740 RPM, GE 215-T frame motor
Voltage:                                      575V/3Ph/60Cy
Overall Dimensions:                   4'  Deep, from Front to Back
                                                     17'  Long from Left to Right
Weight (estimate):                     15,000 lb. ±

Equipped With:

      *  3-point ROLLER Steady Rest, 16" (adaptable)
      *  Oil filled carriage (rapid feed not functional)
      *  Full length coolant/catch tray
      *  Coolant System components included
      *  Rack drive on Tailstock
      *  Taper attachment to adapt available as option

Comments:
            This lathe is very heavily built. It was built under American Niles licence, but had many improvements Bertram incorporated in the Canadian version.  It can still perform lots of heavy work.  Though older, parts are still available from factory blueprints.  Very reasonably priced.
 

Price (FOB Canada, Montreal): . . . . $ 3,950.00 USD