Specifications:

     Capacity:                            2000 Lbs. at 12" from table surface @ 90° tilt
     Length:                               64"
     Width:                                 52"
     Height, Floor to Table:     32" (w/table horizontal)
     Weight:                              1500 Lbs. approx.
     Table Dia.:                         36"
     Electrics:                            120V / 60 Hz /1 Ph. Input (Single Phase)
                     Tilt Motor:         3/4 HP, 1800 RPM - (Stearns)
             Rotation Motor:        1/2 HP, 90V D.C.  (Modern perm-magnet motor)

     Tilt Range:                         From Horizontal, 10° Back, 100° Forward,
                                                 with adjustable limit switch stops
     Tilt Controls:                     Momentary Contact (Stop-When-Released) push buttons
                                                 for Up, Down, and Limit Switch Over-Ride on side panel

     Rotational Controls:          Left/ Right/Off Selector Switch; Rotation Start/Stop by
                                                 either Momentary Contact Switch on side panel, or Foot
                                                 Pedal  on 10 Ft. long cable; 0-100% Speed Potentiometer on
                                                 panel, zero to approx. 5 RPM

FEATURES:

•            New Tilting Pinion Gears
•            New Bearings and Seals on Input and Output Gearbox Shafts
•            New Leather open  Gear Protector Buttons
•            All -Sealed, No V-Belts
•            Less than 100 hours since Rebuild
•            Runs on Single Phase, can be operated anywhere

NOTES:
           Table has been improved with reinforcing 1" sq. ring with roller bearings installed.

Price, ex-location (Canada):  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 3500 USD