Stock#      C1501

Specifications:

Drill Radius, spindle nose-> column ctr.:      7'
Drill Dist., spindle nose-> column casting:    6'
Diameter of Column:                                     15"
Quill Travel:                                                   21"
Morse Taper:                                                  #6 MT
Vertical Travel of Arm:                                 48"
Clamping (both arm and column):                 All Hydraulic
Feeds:                                                             18 (incl. tapping)
Tapping (NPT):                                              8, 11.5, 14 tpi
Speeds:                                                           36
Speed range:                                                  14-1010 RPM
Horse Power & Voltage:                              15 HP @ 550/3/60
Year:                                                               1965+
Base floor space:                                           113" x 43"
Length overall:                                              143"
Height overall (to top of elev. motor):         126"
Weight (est.):                                                 9+ tons

Comments:
         This fine drill was used irregularly at Canadian Steel Foundries' now closed
         railroad parts division. With its tapping capabilities and full hydraulic clamping
         systems, it represents good value in a drill of this size.

Price, Loaded, FOB Montreal, Canada . . . . . . . . . . . . . . . . . . . . . . .  $6900 USD