....Photo #2....Photo #3....Photo #4

Stock No:                                                                1687

Specifications:

Spindle Diameter:                                                  4"
Morse Taper:                                                        #6
Spindle:                                                                  18"
Column Size:                                                         22" Diam.
HP of  Spindle Motor:                                          20 w/ Dynabrake
REACH:                                                                106"
(From Center of Spindle to Center of Column w/Spindle Vertical)
Dist. from Center of Spindle to Floor:                 Max. 139"
(when Horizontal):                                                   Min. 19"
Hor. travel of column on runway:                        8'-10' ±
Traverse Rate on Runway:                                  80"
Vert. Travel of Head on Col.:                              60"
Traverse Rate on Col.:                                         80"
Travel of Head & Rail on Rail Side:                   36"
Traverse Rate of Rail (Inches per Min.):           60"
Swivel of Head on Trunnion:                               360 degrees
Swivel of Trunnion on Rail:                                 180 degrees
Column Swivel:                                                     360 degrees

FEEDS AND SPEEDS:

No. of Spindle Speeds:                                          9 speeds
Spindle Speed Ranges in RPM-
            Standard:                                                   35-600
            Range #1:                                                  45-800
            Range #2:                                                  25-400
No. of Spindle Feeds:                                            9
Spindle Speed Ranges in Inches per Revolution of Spindle-
            Standard:                                                   .0035-.062
            Range #1:                                                  .007  - .125
            Range #2:                                                  .0065 -.125
            Range #3:                                                  .0085 -.125

Runway-
            Height:                                                       16"
            Length:                                                      120"
            Width:                                                        56"
Width of Runway Ways:                                       7"
Length of Slide Bearing on Runway:                   69-3/8"
Length of Slide Bearing on Column:                    44"
Height of Machine (overall):                                171"
Manufactured orig. new in 1956:                          S/N 248
Electrics required:                                                 220-440/3/60Hz
Net Weight:                                                            48,500 Lbs

FEATURES:

* Portable
* Cost $140,000 USD

NOTE:
  This machine was completely rebuilt by "Giddings and Lewis" in 1987
   at a cost of close to $18,000 USD. It has been virtually unused since.

Price  (FOB our warehouse, we ship lowest cost):      .     .     $ 28,750.00 USD
                                                                                                or $ 43,125.00 CAD