Stock:                                    C1886

 Specifications:

 Manufacturer:                        Solem (USA)
 Model:                                     SBES-1-49
 Serial No:                                1868
 Capacity:                                 50" Wide sanding belt
                                                  52" Width conveyor opening
 Grinding Motor:                      50 HorsePower @ 1180 RPM
        "        "     Frame Size:    405-US
 Conveyor drive motor:            5 HP @ 1750 RPM
 Voltage:                                   208/220/440 3 Phase
 Construction & Design:          Horizontal variable-advance rate rubber conveyor belt-feed
                                                  of flat sheet materials as metal, wood, etc. through the
                                                  machine, with simultaneous top-surface abrasive finishing
                                                  applied by the bottom contact weel of auto-tracking,
                                                  constant tension, full-width abrasive belt.

 FEATURES:

           *   Belt is auto-tensioning, with a compensation tracking device
           *   Conveyor through feed is variable speed

 NOTES:
            During last ten years, machine was used only lightly for the surface
            conditioning of felt. It is in very good condition, though one cover is
            missing. It is ready to put in service after dust cover is replaced.