PRESSES, MECHANICAL
| OBI
(punch) |
| 
90 ton, Hi-speed MINSTER DRAWING PRESS. double
action, 4 ft. windows.
(Licensed and mfg. by top Japanese Hi-Precision Machining Center Maker,-
"SNK".
Can draw 3" cup @ 1050 pcs/min. drawing), model DCM-1200, Price:
Call Ref: 2327
|
|
80± ton, "CMCM", back geared, 550V , 6HP, S/N: 220768D3, 20" x 32"
bed,
13" SH, stroke 5/16"-4"1/2, 12" BH, air clutch, T-slot in bed, Price: $4,850
USD Ref: C1620 |
|
60 ton, "Bliss", back geared, model: 21 1/2, 550V, 5hp, full disconnect,
starter button,
15" 1/2 clearance, 22" x 32" table, 5-6" str, 13" open height, Price: $3,500
USD Ref: 2110 |
|
40 ton, "Rousselle", model 4, 220V/440V/3ph, S/N: EASA5641-65, bed
16" x 26", str 3", SH. 12",
throat 9.5", hole in ram 2", bolster 1.75", air clutch, 5HP, 105 SPM.,
Price: $4,950 USD Ref: N0600 |
|
40 ton, "CMC", back geared, mod: 21, bed: 19" x 28", str. 4", SH.
10", throat:9.5", pin 2",
bolster 2", air operated mech. clutch, electric foot pedal actuation, hole
in bed: 16" x 12",
clearance 13.5", PEC safety control, no motor, Price: $1,950 USD Ref:
N0605 |
|
40 ton, "Bawden", back geared, model 4, S/N: 46-4B6, 3-4" str.
17" x 28" bed, BA 10.5" SH 2.5", Price: $2,250 USD Ref:
N0636 |
|
40 ton, "Brown Boggs", model 15LW, full guarding, double-palm push
button,
anti-tiedown system, air-op. mech. clutch, friction brake, stroke counter,
full-size
bolster plate, magnetic motor starter, work light, Price: CALL Ref:
9272 Photo
2 |
|
 40
ton, V&O, Price: $3,750 USD Ref : 2338 |
|
38 ton, "Marcati", mod. 38, 2HP, 550V, S/N: 38-002, adj. str. 2 1/2",
16" x 24" bed, Price: $2,250 USD Ref: 1958 Photo
2 |
|
 35
ton, "V&O", model 3, str. 2", SH. 8 1/2", bolster 2", clearance
11", Price: $2,750 USD Ref: N0611 |
|
20 ton, "V&O", mod. 2½, bed: 13" x 20.5", str. 3" approx.,
SH 7.5", throat: 6", clearance 10", Price: $1,500 USD
Ref: N0612 |
|
10 ton, "Brown Boggs", mod. 11L, str. 1.5", SH 7", throat: 4.5", hole in
ram 1.5" dia.,
clearance 7", bolster thick 1.5", 9" x 14" bed., older, guard, footclutch,
Price: $750 USD Ref: N0634 |
|
10 ton, "Bliss", model 19, bed 14" x 20", Str. 3", SH 8.5", throat: 7.5",
pin: 1.5", eccentric, electric
feeder drive, mechanical, clearance: 7", bolster: 1.5", hole in bed:
9 x 11", Price: $1,200 USD Ref: N0601 |
|
1 ton, "Alceco", mod. 1-1/2, 110V/220V/1ph, S/N: 191, on stand,
on/off switch, 1/3 HP, Price: $250 USD Ref : N0707
SOLD |
|
 1
ton, "Benchmaster", 115V, S/N: 5KH3, elec. clutch, foot pedal, 1/12
hp, Price: $450 USD Ref : 2335 SOLD |
| KNUCKLEJOINT
(coining) |
 800
ton, "Toledo" knucklejoint Ref: 9191
SOLD |
|
 600
ton, "Clearing" knucklejoint, (Unbreakable) SOLD |
|
 400
ton, "Toledo" knucklejoint, 1-1/2" str., 22" x 20" bed, 11" SH, 20 spm, Price:
$12,500 USD Ref: 9201 |
|
 Press
coining, more details upon request, Price: Call Ref:
9268 |
| SSDC
& SSSC |
 260
ton, "Niagara" 128" x 36", 4" str., SSDC Ref:
9229 SOLD |
|
250 ton, "Verson". SSDC, 600V, mod. 250 S2 60, str: 8",
adj.: 8", SH: 24", S/N: 4942, Price: Call Ref:
9279 Picture
2 SOLD |
|
 40±
ton, "Linde-Wuppertal", SSSC Ref: 2328 |
|
 35
ton, "Wales", 62" x 16", 2-Post SSDC Ref:
P1206 SOLD |
| C-FRAME |
 50
ton, "Wuppertal", C-frame, AC feeder, Price: $3,500 USD Ref:
2223 SOLD |
|
 C-frame
punch press, Price: Call |
|
 15
ton, "Embree", C-frame, punch, mod. 15, S/N: 140, table type, solid,
Price: Call Ref: 2254 |
|
 5
ton, "Rousselle", C-frame, mod. OG, 220V/1ph, 1-1/4" str., 7-1/2" SH.,
Price: $850 USD Ref: 2277 |
| ARBOR |
 5
ton, "Greenerd", arbor, solid cast body and base, very clean, Price: $1,850
USD Ref: 9156 SOLD |
| OTHER
TYPES |
 150
ton, 4-Post, 32" x 40' bet. pins, under-driven cut-off, (flying shear)
Ref: 1871 |
|
 75
ton, "Cleveland" geared horning Ref: 1612 |
|
40 ton, gap frame, stamping "Rousselle" mod. 4W, no motor, S/N: 215,
new bearings in flywheel, adj. table height, 2" str., 37"1/2 BH, 20" approx.
daylight, 18" x 54" table, double crank, 9" x 36" ram, Price: $3,500
USD Ref: P0177 |
|
10 ton, deep-throat "Roper-Whitney", mod. 150, 24" throat, 175 SPM, 9" throat,
SH 7", 1600 lbs, 2" str.,
575V, S/N: 568678, air operated clutch, foot pedal, fiberglass guards,
Price: $2,900 USD Ref: 1884 |
|
 Kick,
"Machine Works Limited", mod. 2, newly painted, Price: $250 USD Ref:
2243 |
| AIR |
 20-40
ton, custom made perforator pneumatic press Ref:
9235 SOLD |
|
 4
ton, "Air-Hydraulics", C-400, S/N: 4125, dim. 24" W x 29" D x 81" H,
Price: $2,250 USD Ref: 2015 |
|
3 ton, air-hyd., custom made, 110V, upper heated platen, adj. up to 280
deg.,
6" str., 6" day., 8" cyl. dia., welded construction, Price: Ref:
2065 SOLD |
|
 Pneumatic,
straightening, Price: Call Ref: 1659 |
|
Thermal, 125 psi., "Thermopress", mod. HP-4-A, S/N: 5392-1, 115V, 7.5 amps.,
400 watts, w/timer, pressure reg., pressure gauge, on/off switch, Euclid,
Price: Call Ref: 2249 |
| ACCESSORIES |
 Chopper,
scrap, 6" x 1/16", "Cooper Weymouth", 3HP, 110V/230V, S/N: SC1-45,
Price: $875 USD Ref: 2256 |
|
 Chopper,
scrap, 4", "Cooper Weymouth", 1HP, 550V, Price: $750 USD
Ref: 1882 |
| More
presses available - please CALL |
40
ton, V&O, Price: $3,750 USD
35
ton, "V&O", model 3, str. 2", SH. 8 1/2", bolster 2", clearance
11", Price: $2,750 USD
1
ton, "Benchmaster", 115V, S/N: 5KH3, elec. clutch, foot pedal, 1/12
hp, Price: $450 USD
400
ton, "Toledo" knucklejoint, 1-1/2" str., 22" x 20" bed, 11" SH, 20 spm, Price:
$12,500 USD
Press
coining, more details upon request, Price: Call
50
ton, "Wuppertal", C-frame, AC feeder, Price: $3,500 USD
C-frame
punch press, Price: Call
5
ton, "Rousselle", C-frame, mod. OG, 220V/1ph, 1-1/4" str., 7-1/2" SH.,
Price: $850 USD
5
ton, "Greenerd", arbor, solid cast body and base, very clean, Price: $1,850
USD
Kick,
"Machine Works Limited", mod. 2, newly painted, Price: $250 USD
20-40
ton, custom made perforator pneumatic press
4
ton, "Air-Hydraulics", C-400, S/N: 4125, dim. 24" W x 29" D x 81" H,
Price: $2,250 USD
Pneumatic,
straightening, Price: Call
Chopper,
scrap, 6" x 1/16", "Cooper Weymouth", 3HP, 110V/230V, S/N: SC1-45,
Price: $875 USD
Chopper,
scrap, 4", "Cooper Weymouth", 1HP, 550V, Price: $750 USD
