SHEARS, ALL TYPES
| POWER SQUARING |
 "Cincinnati",
12' x 3/4", mechanical SOLD |
|
 "PELS",
12' x 3/8", mechanical power plate gap Ref:
1693 |
|
 "Stanko",
10' x 1-1/8", power squaring, gap SOLD |
|
"Haco", hyd., 10' x 1/2", model TS312, 1986, S/N: 64303,
elec.
backgauge, $25,750 USD Ref: 9281 Picture
2 Picture 3
Picture 4 |
|
 "BLV",
(Can.), 10' x 3/8", hydraulic power squaring Ref:
9164 |
|
"Pacific", hyd. 10' x 3/8", model 375-HD-0, exc. condition,
man. backgauge, Price: $22,500 USD Ref: 9280
Picture 2 |
|
 10'
x 1/4", "Niagara", model JL10, 24" manual backgauge,
Price: Call |
|
 "JER",
(Denmark), 10' x 1/4" hydraulic power gap Ref:
1969 |
|
"JER", model 3004, 10HP, 600V, holdowns, manual
backgauge, front support, Price: Call Ref: 9289
SOLD |
|
 "Niagara",
6' x 1/2", gap, mod. K6, 220/440/3ph, S/N: 46888, Price: $18,500 USD
Ref: 9256 |
|
"Famco", 6' x 20 ga., mod. 172, 550V, 5hp, S/N: S-M60YZ03,
squaring arms, armguards, foot switch, Price: $4,500 USD Ref:
P0104 |
|
 .."Brown
& Boggs", 4' x 1/8", power squaring gap Ref:
C1511 |
| ALLIGATOR |
 "Canton
Hill Acme", 30", VO 30A, 10 HP, 1735 rpm, 550V, no blades, Price: $7,500
USD Ref: 9263 |
|
 "Canton",
24", 575V, 10 HP, blades in excellent condition, Price: $7,500 USD Ref:
9264 |
|
 "Doelger&Kirsten",
NO2, 24" x 1/2", Price: Call Ref: 9217 SOLD |
|
 "Hendey
& Whitemore", 7", model 47, mechanical HD, Price: $2,750 USD
Ref: 9267 |
|
 4",
all-in-one hydraulic power unit, Price: $1,250 USD Ref:
9266 |
| BAR
& BILLET / REBAR |
"Bertram", 10" blades, 2" Dia. round bar & billet, HD, 550V,
heavy duty, dim.108" L x 70" W x 75" H., Price: $5,500 USD Ref:
N0768 |
|
 "Peddinghaus",
rebar, cap. 1-1/4", 550V, 3hp, Price: $2,750 USD Ref:
2312 Picture
2 |
| MECHANICAL |
 "Cincinnati",
10' x 1" Ref: 1888
SOLD |
|
"Cincinnati", 10' x 1/2", S/N: 14188, model 4310, holdowns,
central lube, spare blades, Price: $23,000 USD .SOLD |
|
 "Edwards",
6' x 18 ga., foot, model Pedicut 600, Price: $2,500 USD Ref:
2000 |
|
"Niagara", 6' x 14ga., model 36-B, 230V/3ph, 1960, air op.
clutch, holdowns, Price: $4,850 USD Ref:
1985 |
|
 "Brown
Boggs", 4' x 16 ga, single phase, Price: $2,750 USD Ref:
1911 SOLD |
|
 "Regent", 4'
x 16 ga., freshly painted, newly installed motor, 550V, Price: $2,500 USD Ref:
N0929 |
|
"Brown Boggs", 3' x 16 ga., model 237BL, 1980's, S/N: B3709, very good condition,
with full length clamping, twin front supports, squaring guide, original
hardwood foot
pedal, foot original springs, adjustable. Price:: $850 USD Ref:
1974 |
|
 "Brown
Boggs", 30" x 18ga, foot, S/N 4261, front support, Price: $850 USD
Ref: 2085 SOLD |
|
 "Di-Acro",
24" x 16ga., Hi-Precision hand shear, model 4, S/N EB-2198, Price: Call Ref:
2252 SOLD |
|
 Custom
made, 7", man., could be motorized or fitted with hydraulic cylinder Price:
Call Ref: 9265 |
|
 "Buffalo",,
6" blade, 1-1/2" punch, 1" bar shear, mod. 4-1/2, Price: $750
USD Ref: 2251 |
|
 "FW.
Mears", 2-3/4" blade, hand shear, rotating base, tilting head, S/N: 1263, Price:
$450 USD Ref: 2106 |
| AIR |
"Brown Boggs", 6' x 18ga., squaring, air operated, cam hold down, 1960's,
two
front support arms, hold down, in excellent condition, Price: $3,250
USD Ref: P0105 |
|
Shop built, 8" air shear, pivot type, 6" air op. bending brake attachment,
foot pedal, floor stand, Price: $350 USD Ref:
C1660 Photo
2 |
| FLYING |
 32"
x 40' bet. pins, 150 ton, 4-post, underdriven flying shear (cut-off press) |
| PAPER |
"Seybold", 36-48", model 6Z, 550V, 5HP, 1960', pneumatic
holdowns, Telemecanique controls, Price: $1,750 USD Ref:
2200 |
| More
shears available - please CALL |
10'
x 1/4", "Niagara", model JL10, 24" manual backgauge,
Price: Call
"Niagara",
6' x 1/2", gap, mod. K6, 220/440/3ph, S/N: 46888, Price: $18,500 USD
"Canton
Hill Acme", 30", VO 30A, 10 HP, 1735 rpm, 550V, no blades, Price: $7,500
USD
"Canton",
24", 575V, 10 HP, blades in excellent condition, Price: $7,500 USD
"Doelger&Kirsten",
NO2, 24" x 1/2", Price: Call
"Hendey
& Whitemore", 7", model 47, mechanical HD, Price: $2,750 USD
4",
all-in-one hydraulic power unit, Price: $1,250 USD
"Peddinghaus",
rebar, cap. 1-1/4", 550V, 3hp, Price: $2,750 USD
"Edwards",
6' x 18 ga., foot, model Pedicut 600, Price: $2,500 USD
"Brown
Boggs", 4' x 16 ga, single phase, Price: $2,750 USD
"Regent", 4'
x 16 ga., freshly painted, newly installed motor, 550V, Price: $2,500 USD
"Brown
Boggs", 30" x 18ga, foot, S/N 4261, front support, Price: $850 USD
"Di-Acro",
24" x 16ga., Hi-Precision hand shear, model 4, S/N EB-2198, Price: Call
Custom
made, 7", man., could be motorized or fitted with hydraulic cylinder Price:
Call
"Buffalo",,
6" blade, 1-1/2" punch, 1" bar shear, mod. 4-1/2, Price: $750
USD
"FW.
Mears", 2-3/4" blade, hand shear, rotating base, tilting head, S/N: 1263, Price:
$450 USD
